1 Configuration memories.

Click over any previously memorizied frequency (in bright red) to recover its frecuency in the tuner. Remember to first select the band in which the frecuency was stored.

2 Store configurations into memory.

To store the working frecuency and all present configuration, the memory feature is activated by clicking on the MEM button. Then memories 1 to 5 flash. Next, click any of the memories to stock.
If the memory had any previous preset stored, it is overriden.

There are up to five memories for each band (25 in total).

In order to clear a memory, doble-click over its number.

3 By-Pass and Band selection.

By default Stand-By.Click over any band to start working.

4 Attenuation.

When needed, click and add 6dB, 12dB or 18dB of attenuation. Click over 0dB for no attenuation.

5 Preamplifier on/off.

Alternatively set on (light on) and off (light off) preamplifier.

6 Antenna1/Antenna2 selection.

Click over antenna1 or antenna2 as desired.

7 Set tuning steps.

Set tuning steps x1 (fine), x2, x5 and x10 (biggest step).

8 Tuning.

Performs tuning by pressing left or right arrow in the keyboard or turning mouse wheel.